Spartanburg Facility
115 Coastline Road
Spartanburg, SC 29301
IATF 16949:2016 Certified
Spartanburg Warehouse
Total Square Footage : 220,000 Sq. Ft.
Forklift Side/Rear
Overhead Crane
Overhead Crane
30 Tons / 84″ OD / 72″ Width
CSX Incoming/Outgoing via Covered Gondola, 24 Cars Per Day
Coil Width 12.00–74.00″
Coil Weight 60,000#
Coil OD Max 72.00″
Coil ID 20.00–24.00″
Coil Weight 60,000#
Coil OD Max 72.00″
Coil ID 20.00–24.00″
Max output: 4 blanks across
Blank Width 8.00–72.00″
Blank Length 12.00–168″
Skid Height 24.00″
Blank Length 12.00–168″
Skid Height 24.00″
Stainless .095–.0190″
Mild Carbon .135–.0190″
Aluminum .135–.0190″
Mild Carbon .135–.0190″
Aluminum .135–.0190″
40,000psi up to .135 thick
60,000psi up to .110 thick
80,000psi up to .095 thick
60,000psi up to .110 thick
80,000psi up to .095 thick
Slit Width Tolerance +/- .005
+/- .032 length
Tighter tolerances by request
Gauge Range .020 – .125
+/- .032 length
Tighter tolerances by request
Gauge Range .020 – .125
Available Up To 48.00″
Upon Request
.500 Minimum
Hot Rolled Pickled
Cold Rolled
Galvanized
Tin Plate
Preprinted
Stainless
Aluminum
Cold Rolled
Galvanized
Tin Plate
Preprinted
Stainless
Aluminum
Multi Blanker
Braner USA
72" Slitter
Chicago Slitter
Coil Width 74.00″
Coil Weight 60,000#
Coil OD Max 84.00″
Coil ID 20.00–24.00″
Coil Weight 60,000#
Coil OD Max 84.00″
Coil ID 20.00–24.00″
Coil Width 72.00″
Coil Weight 60,000#
Coil ID 20.00–24.00″
Coil Weight 60,000#
Coil ID 20.00–24.00″
Slit Width Tolerance +/- .005
Edge Trim Required .500″
Minimum Slit Width 1.25″
Maximum Cuts Per Pass 30
Gauge Range .015 – .1875
Edge Trim Required .500″
Minimum Slit Width 1.25″
Maximum Cuts Per Pass 30
Gauge Range .015 – .1875
Roll Tensioning
Shimless Tooling
Injection Slitter Heads
Tungsten Carbide Knives
Over/Under Rewind Capabilities
Separate Tension Units for Oily or Dry material
PVC Application Available
Shimless Tooling
Injection Slitter Heads
Tungsten Carbide Knives
Over/Under Rewind Capabilities
Separate Tension Units for Oily or Dry material
PVC Application Available
Hot Rolled Pickled
Cold Rolled
Galvanized
Tin Plate
Preprinted
Stainless
Aluminum
Cold Rolled
Galvanized
Tin Plate
Preprinted
Stainless
Aluminum
